softub chemicals


Softub Chemicals

Chlorine Alternative

Softub Test Strips

Softub Filters

Softub Hydrotherapy

Softub Fragrances

Softub Cleaning

Softub Accessories

More Softub Accessories

SpaDuck Specials

SpaDuck Gift Cards


Softub Repair

Softub Help

Printable Fax Order Form

Links of Interest

Email SpaDuck








Copyright © 2003
All Rights Reserved

Bromine Tablets

Bromine Disinfectant Tablets
The spa care system specifically formulated for vinyl lined spas, Softub, & SplashTub.


This product is a new form of brominating hydantoin for your vinly lined Hot Tubs. It is easily adapted to many erosion feeders used to automatically treat commercial spas, Splashtub, & other vinyl lined Softub spas. When used as directed, this product will disinfect the water, keeping it clean, clear, & free of odor. This product gives the effectiveness of chlorine with out the chlorine odor. Proper sanitary practices require changing the Softub water at a minimum of every 30 days.

Use of this product in a Softub is not recommended. For more information on this product please email us at


Note: Before using this product in your vinyl lined Hot Tub for the first time, add 1/2 ounce of sodium bromide per 100 gallons of water to establish a 30 ppm bromide reserve. Also, add sodium bromide whenever the vinyl lined Hot Tub is drained or refilled. The bromide reserve is needed to keep the system completely bromide based, to eliminate chlorine odors, & to assure maximum water comfort to skin and eyes in the Hot Tub with this treatment system.

To start up a new or recently drained vinyl lined Hot Tub, clean all surfaces, back flush or clean the soft tub Filter, chemically balance the calcium hardness and total alkalinity, treat for iron, copper and manganese, if present and adjust the pH to 7.4-7.6, prior to initiating treatment with this product.

Add sodium bromide, as described above. Place soft guard product in a suitable feeder. Make sure when the lip is closed on your soft tub that the dispenser floats and doesn't get hung up by the lid. You can also take one of the tablets and break it up and add a tsp of bromine in a seperate cup of spa water and let it disintegrate. Then add to your vinyl lined hottub. Or you can use the feeder by adjusting it to the manufacturers directions to maintain an active bromine level of 2-4 ppm in spas. Use a reliable test kit for free bromine measurements, like the AquaChek Bromine Softub Test Strips.





Home |Softub Chemicals | Chlorine Alternative | Softub Accessories | More Softub Accessories
Softub Filters | Softub Cleaning | Softub HydroTherapy | Softub Help
SpaDuck Specials | Softub Covers | Softub Fragrances | Softub Repairs
Contact | Policies | Links | Fax Order Form | Site Map | Join Our Mailing List
Articles of Interest

Softub® is a registered trademark of Softub, Inc.
SplashTub® is a registered trademark of Splash SuperPools, LLC.